HOME   |   CONTACT US   |   ENGLISH
PRODUCT Info.
 
 
 

HOME > PRODUCT > Data Acquisition

 

PCI-EK01
Multi-Function Data Acquisition(AD/DA/Digital) Board

 

   - Multi-function(AD/DA/Digital) 보드
   - PCI 32Bit/33MHz 5V/3.3V Compatible
   - 12bit ADC 8 Channel
   - 12bit DAC 4 Channel
   - 24bit Digital I/O
   - 32bit Conuter/Timer
   - Spartan XC3S200 / 8Mbit SRAM
   - 응용 프로그램 작성을 위한 API 제공

  제품가격 \250,000



Apllication Notes
1.   How to install PCI DAQ Board
2. AN203 PCI-EK01 Register Level Application Guide
3. AN204 PCI-EK01 Driver Level Programming Guide

 

 

PRODUCT INFORMATION

Introduction
PCI-EK01은 PCI 마스터를 위한 설계와 개발 로직을 위한 보드입니다. 또한, 아날로그 디지털 변환기(ADC), 디지털 아날로그 변환기(DAC), Wave Generator, 고전력 드라이버를 포함한 빠른 동작의 데이터, 다기능 목적에 사용할 수 있습니다.


Application
PCI Development and Evaluatuon
Data Acquisition
Laboratory Instrumentation
Process Control Systems


Specification
General

- PCI Specification V2.2 32bit/33MHz, 5V/3.3V Compatible 
- Full 33MHz Burst Read/Write Operation
- Average Data rate is 30MB Data to, 8MB data from board without DMA
- Very flexible to upgrade because of FPGA

Analog
Input

- 12bit Resolution 8 Single or 4 Differential Input ADC
- 0 ~ +3.3V, ±1.65V Input Range
- Max. 200Ksps(5uSEC) Conversion Time
- Can change sampling interval auto scanning mode by 2.5uSEC increment
- Power on Auto-calibration / ±1 (LSB) INL/DNL
- ±1uA Analog Input Leakage Current / 20pF Ananlog Input Capacitance
- On-board 1024 x 16 FIFO / On-board 256K x 16 SRAM

Analog
Output

- 12bit Resolution DAC 4 Channel
- Output Range : +0 to +3.3
- Max. 1M(1uSEC) Update Rate
- Can change sampling interval auto scanning mode by 2uSEC increment
- Simultaneous Updates of Output
- ±16(LSB)INL / ±1(LSB) DNL
- ±13(LSB) Offset Error / Slew Rate 0.7V/sec
- On-Board 1024 x 16 Waveform Generation Dual-Port RAM

Digital
In/Out

- On-board 82C55 Chipset
- 24bit General Purpose I/O
- Three 8bit Group(Port A/B/C) / 3.3V cMOS logic level
- Port B has High Current Sink Capability (Max. 500mA)

Timer/
Counter

- 32bit Timer / 32bit Counter
- Input Frequency Max. 60MHz / 25ns Timer Resolution
- One-shot or Alternate Timer Output Mode
- 3.3V cMOS Logic Level

Physical
Specification

- Connector : D-SUB25 for Analog In/Out, Timer/Counter, DSUB-15(Video Signal)
- Operating Temperature : 0 ~ 70℃
- Storage Temperature : -20 ~ 80℃
- Relative Humidity : 20 to 80% non-condensing
- Power Requirements : +5VDC at Max. 1A typical
- Dimension (not including connector) : 175mm x 95mm

Software Support
OS Information - Windows 2000/XP/7
- 32bit Driver
Software Compatibility - Application through client DLL
- Sample Program Included(VC++)